请选择 进入手机版 | 继续访问电脑版

GODIY 自己动手亲力亲为的DIY社区一起来吧--GODIY论坛

 找回密码
 注册

扫一扫,访问微社区

搜索
楼主: xujiahai

内核最新3.14.30系统功能完整版!放出我编译出的全部软件(已更新系统内核)

[复制链接]
发表于 2015-4-6 10:12:11 | 显示全部楼层
先 记号 感谢分享  


我先学习后升级
发表于 2015-4-7 12:17:04 | 显示全部楼层
启动了minidlna但是却搜索不到,看见已经读取出媒体数据了,但是各个设备都不能找到、、希望楼主能看看是什么情况。
发表于 2015-4-11 15:19:10 | 显示全部楼层
  1. [    6.314895] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  2. [    6.326776] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  3. [    6.334512] ehci-platform: EHCI generic platform driver
  4. [    6.651415] scsi0 : sata_oxnas
  5. [    6.715389] ata1: SATA max UDMA/133 irq 50
  6. [    6.719715] sata_oxnas: resetting SATA core
  7. [    7.240028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  8. [    7.346856] sata_oxnas: resetting SATA core
  9. [    7.700044] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
  10. [   12.860026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  11. [   12.966853] sata_oxnas: resetting SATA core
  12. [   13.320043] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
  13. [   13.327329] ata1: limiting SATA link speed to 1.5 Gbps
  14. [   17.840020] INFO: task kworker/u4:0:6 blocked for more than 8 seconds.
  15. [   17.846522]       Tainted: G           O 3.14.30 #1
  16. [   17.851402] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  17. [   17.859192] kworker/u4:0    D c000ecf8     0     6      2 0x00000000
  18. [   17.865559] Workqueue: events_unbound async_run_entry_fn
  19. [   17.870922] [<c000ecf8>] (__schedule) from [<bf156bac>] (ata_port_wait_eh+0x5c/0x2f4 [libata])
  20. [   17.879544] [<bf156bac>] (ata_port_wait_eh [libata]) from [<bf1519fc>] (ata_port_probe+0x2c/0x34 [libata])
  21. [   17.889218] [<bf1519fc>] (ata_port_probe [libata]) from [<bf151a48>] (async_port_probe+0x44/0x64 [libata])
  22. [   17.898887] [<bf151a48>] (async_port_probe [libata]) from [<c003fd68>] (async_run_entry_fn+0x78/0x178)
  23. [   17.908190] [<c003fd68>] (async_run_entry_fn) from [<c0034d70>] (process_one_work+0x21c/0x36c)
  24. [   17.916805] [<c0034d70>] (process_one_work) from [<c0035a80>] (worker_thread+0x240/0x3f8)
  25. [   17.924986] [<c0035a80>] (worker_thread) from [<c003ab7c>] (kthread+0xd8/0xe4)
  26. [   17.932211] [<c003ab7c>] (kthread) from [<c0008718>] (ret_from_fork+0x14/0x3c)
  27. [   17.939399] Kernel panic - not syncing: hung_task: blocked tasks
  28. [   17.945382] CPU1: stopping
  29. [   17.948090] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G           O 3.14.30 #1
  30. [   17.955046] [<c0019548>] (unwind_backtrace) from [<c0015cac>] (show_stack+0x10/0x14)
  31. [   17.962769] [<c0015cac>] (show_stack) from [<c0164d68>] (dump_stack+0x7c/0x94)
  32. [   17.969976] [<c0164d68>] (dump_stack) from [<c00180d0>] (handle_IPI+0xcc/0x17c)
  33. [   17.977264] [<c00180d0>] (handle_IPI) from [<c00084d4>] (gic_handle_irq+0x54/0x5c)
  34. [   17.984808] [<c00084d4>] (gic_handle_irq) from [<c0008f80>] (__irq_svc+0x40/0x50)
  35. [   17.992253] Exception stack(0xc7867f98 to 0xc7867fe0)
  36. [   17.997278] 7f80:                                                       ffffffed 00000000
  37. [   18.005419] 7fa0: c03f9c40 00000000 c7866000 c7866000 c03f92b8 c03456e8 c03fcc72 00000001
  38. [   18.013562] 7fc0: c03fcc72 c7866000 00000014 c7867fe0 c0013b5c c0013b60 60000013 ffffffff
  39. [   18.021711] [<c0008f80>] (__irq_svc) from [<c0013b60>] (arch_cpu_idle+0x30/0x50)
  40. [   18.029091] [<c0013b60>] (arch_cpu_idle) from [<c00581e8>] (cpu_startup_entry+0xd0/0x130)
  41. [   18.037250] [<c00581e8>] (cpu_startup_entry) from [<60008560>] (0x60008560)
复制代码
每次一但用SATA口挂载硬盘就会卡在这里,我重新刷了几次都是这样,USB的不会。格式我试过EXT3、4,NTFS,可能与格式无关。
求教问题是在哪里,如何解决?
发表于 2015-4-21 15:33:19 | 显示全部楼层
transmission无速度
发表于 2015-6-7 08:58:14 | 显示全部楼层
楼主能把cpulimit整合到固件中吗?
发表于 2015-6-11 10:16:10 | 显示全部楼层
试刷了一下,问题和33楼一样,果断刷回0708版
发表于 2015-6-18 13:53:46 | 显示全部楼层
试刷了一下,问题和33楼一样,果断刷回0708版
xiaoma123 发表于 2015-6-11 10:16


哎呀!太不容易啦,我还以为我没搞对。我也刷回原来的了。
发表于 2018-1-7 15:46:31 | 显示全部楼层
现在pogo的东西好难找,大家都不玩了吗?
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|小黑屋|手机版|Archiver|GODIY论坛 ( 粤ICP备12089271号

GMT+8, 2018-10-16 04:28 , Processed in 0.118690 second(s), 7 queries , File On.

Powered by Godiy.net

快速回复 返回顶部 返回列表