请选择 进入手机版 | 继续访问电脑版

GODIY 自己动手亲力亲为的DIY社区一起来吧--GODIY论坛

 找回密码
 注册

扫一扫,访问微社区

搜索
楼主: mk-link

【10-4日更新】小白刷OPENWRT更简单。SATA救砖更简单。6in1一键刷机系统

[复制链接]
发表于 2013-10-19 17:42:54 | 显示全部楼层
我的128M 今日去不能输入命令,键盘没有反应,不知道什么为题请指教
QQ图片20131019174158.jpg
发表于 2013-10-21 10:39:10 | 显示全部楼层
本帖最后由 zcyuan 于 2013-10-21 10:44 编辑

用了一键刷机系统,选了3,弄好后重启,发现rootfs挂载不了,死住了,怎么回事
NAS7820 BootStrap v0.1
[Fri Sep 27 08:37:50 CST 2013]
PLX Technology, Inc. 2010. All Rights Reserved
Copyright, lintel 2013.09
CPU Clock set to 700MHz ...
Testing Stage2 Memory...OK!
NAND Flash Info:
        Vendor ID:0x000000AD
        Product ID:0x000000F1
        Type ID:0x00000000

Reading Nand Flash, Image 0
  Hdr len: 0x00021D30
  Hdr CRC: 0x3A0B1834
OK


U-Boot 1.1.2 (Sep 23 2013 - 00:30:38)

U-Boot code: 60D00000 -> 60D21D30  BSS: -> 60D56558
RAM Configuration:
        Bank #0: 60000000 128 MB
SRAM Configuration:
        64KB at 0x50000000
NAND:128 MiB
In:    serial
Out:   serial
Err:   serial
Setting Linux mem= boot arg value
Reading upgrade flag from NAND address 0x01ec0000 : 0
Hit any key to stop autoboot:  0
Turn on Green LED.

Reset IDE: Initialising disks
SATA PHY not ready for device 0
SATA PHY not ready for device 1
ide_preinit failed

IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device

** Unable to use ide 0:1 for fatload **

Reset IDE:
IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device
** Bad partition 1 **

Reset IDE:
IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device

Reset IDE:
IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device

Loading from device 0: 128MiB 3,3V 8-bit (offset 0x200000)
   Image Name:   PandoraBox-OX820-3.1.10
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1197464 Bytes =  1.1 MB
   Load Address: 60008000
   Entry Point:  60008000
## Booting image at 60500000 ...
   Image Name:   PandoraBox-OX820-3.1.10
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1197464 Bytes =  1.1 MB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.10 (xbmc@xbmc-MCP7A) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #11 SMP Wed Sep 25 19:11:24 CST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: PogoPlug Pro
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 7 pages/cpu @c04b8000 s4768 r8192 d15712 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=ubi0:rootfs ubi.mtd=6,512 rootfstype=ubifs rootwait console=ttyS0,115200 mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125548k/125548k available, 5524k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xed000000   ( 584 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc030b000   (3084 kB)
[    0.000000]       .init : 0xc030b000 - 0xc03352a0   ( 169 kB)
[    0.000000]       .data : 0xc0336000 - 0xc0351700   ( 110 kB)
[    0.000000]        .bss : 0xc0351724 - 0xc03b42dc   ( 395 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:146 nr_irqs:146 146
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.000000] console [ttyS0] enabled
[    0.030000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.100000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] Initializing cgroup subsys cpuacct
[    0.110000] Initializing cgroup subsys memory
[    0.120000] Initializing cgroup subsys devices
[    0.120000] Initializing cgroup subsys freezer
[    0.130000] CPU: Testing write buffer coherency: ok
[    0.130000] Calibrating local timer... 349.77MHz.
[    0.190000] platform_smp_prepare_cpus 33
[    0.190000] CPU1: Booted secondary processor
[    0.190000] CPU1:Got wake up!
[    0.270000] Brought up 2 CPUs
[    0.270000] SMP: Total of 2 processors activated (557.87 BogoMIPS).
[    0.280000] devtmpfs: initialized
[    0.280000] NET: Registered protocol family 16
[    0.790000] PCIeA version/deviceID 082510b5
[    0.790000] PCIeB version/deviceID 082510b5
[    3.810000] ox820_pci_preinit() PCIEA link up timeout (00001014)
[    6.820000] ox820_pci_preinit() PCIEB link up timeout (00001014)
[    6.820000] ox820_pcie_setup_resources() Enabling PCIe Pre-Emphasis
[    6.830000] ox820_pciea_setup_resources() resource c781bae0
[    6.830000] ox820_pciea_setup_resources()    io:      0x4be00000 - 0x4befffff
[    6.840000] ox820_pciea_setup_resources()    non-pre: 0x48000000 - 0x49ffffff
[    6.850000] ox820_pciea_setup_resources()    pre:     0x4a000000 - 0x4bdfffff
[    6.850000] PCI: bus0: Fast back to back transfers enabled
[    6.860000] PCI: bus1: Fast back to back transfers enabled
[    6.880000] bio: create slab <bio-0> at 0
[    6.890000] SCSI subsystem initialized
[    6.900000] Switching to clocksource rps-timer2
[    6.910000] NET: Registered protocol family 2
[    6.910000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    6.920000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    6.930000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    6.940000] TCP: Hash tables configured (established 4096 bind 4096)
[    6.940000] TCP reno registered
[    6.940000] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    6.950000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    6.960000] NET: Registered protocol family 1
[    6.990000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.990000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    7.010000] msgmni has been set to 245
[    7.010000] io scheduler noop registered
[    7.020000] io scheduler deadline registered (default)
[    7.020000] io scheduler cfq registered
[    7.030000] ox820_gpio: initialized
[    7.030000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    7.060000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[    8.040000] brd: module loaded
[    8.050000] loop: module loaded
[    8.060000] ox820sata: OX820 sata core.
[    8.060000] scsi0 : oxnassata
[    8.070000] scsi1 : oxnassata
[    8.070000] ata1: SATA max UDMA/133 irq 50
[    8.080000] ata2: SATA max UDMA/133 irq 50
[    8.080000] sata_ox820: Initialized
[    8.090000] ONFI flash detected
[    8.090000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    8.100000] Scanning device for bad blocks
[    8.110000] Bad eraseblock 53 at 0x0000006a0000
[    8.140000] Bad eraseblock 211 at 0x000001a60000
[    8.160000] Bad eraseblock 309 at 0x0000026a0000
[    8.160000] Bad eraseblock 310 at 0x0000026c0000
[    8.170000] Bad eraseblock 320 at 0x000002800000
[    8.170000] Bad eraseblock 329 at 0x000002920000
[    8.200000] Bad eraseblock 466 at 0x000003a40000
[    8.250000] Bad eraseblock 772 at 0x000006080000
[    8.290000] Creating 9 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[    8.290000] 0x000000000000-0x000000040000 : "stage1"
[    8.300000] 0x000000040000-0x0000001a0000 : "u-boot"
[    8.310000] 0x0000001a0000-0x0000001e0000 : "u-boot-env"
[    8.320000] 0x000000000000-0x000002000000 : "boot"
[    8.320000] 0x0000001e0000-0x000000200000 : "factory"
[    8.330000] 0x000000200000-0x000000c00000 : "kernel"
[    8.340000] 0x000000e00000-0x000008000000 : "rootfs"
[    8.350000] split_squashfs: no squashfs found in "NAND 128MiB 3,3V 8-bit"
[    8.350000] 0x000000200000-0x000008000000 : "firmware"
[    8.360000] 0x000000000000-0x000008000000 : "fullflash"
[    8.370000] UBI: attaching mtd6 to ubi0
[    8.370000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    8.380000] UBI: logical eraseblock size:    129024 bytes
[    8.390000] UBI: smallest flash I/O unit:    2048
[    8.390000] UBI: sub-page size:              512
[    8.390000] UBI: VID header offset:          512 (aligned 512)
[    8.400000] UBI: data offset:                2048
[    8.430000] ata1: SATA link down (SStatus 0 SControl 300)
[    8.780000] ata2: SATA link down (SStatus 0 SControl 300)
[    8.800000] UBI: max. sequence number:       9
[    8.810000] UBI error: ubi_read_volume_table: the layout volume was not found
[    8.820000] UBI error: ubi_init: cannot attach mtd6
[    8.820000] Probing for Synopsis GMAC, unit 0
[    8.830000] eth0: Tuning GMAC 0 RGMII timings
[    8.830000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[    8.840000] eth0: Disable EEE (Energy Efficient Ethernet 802.3az)
[    8.850000] eth0: GMAC ver = 53, vendor ver = 18 at 0xed400000, IRQ 40
[    8.850000] eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
[    8.860000] eth0: Ethernet addr: 00:30:e0:00:00:00
[    8.870000] ox820_led_gpio: initialized
[    8.870000] TCP cubic registered
[    8.880000] NET: Registered protocol family 17
[    8.880000] 8021q: 802.1Q VLAN Support v1.8
[    8.890000] VFP support v0.3: not present
[    8.890000] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0)
[    8.900000] Please append a correct "root=" boot option; here are the available partitions:
[    8.910000] 1f00             256 mtdblock0  (driver?)
[    8.910000] 1f01            1408 mtdblock1  (driver?)
[    8.920000] 1f02             256 mtdblock2  (driver?)
[    8.920000] 1f03           32768 mtdblock3  (driver?)
[    8.930000] 1f04             128 mtdblock4  (driver?)
[    8.930000] 1f05           10240 mtdblock5  (driver?)
[    8.940000] 1f06          116736 mtdblock6  (driver?)
[    8.940000] 1f07          129024 mtdblock7  (driver?)
[    8.950000] 1f08          131072 mtdblock8  (driver?)
[    8.950000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    8.960000] Backtrace:
[    8.960000] Function entered at [<c0010f34>] from [<c02a291c>]
[    8.970000]  r6:c032c530 r5:c786b000 r4:c0353150 r3:c033d6a4
[    8.980000] Function entered at [<c02a2904>] from [<c02a2b60>]
[    8.980000] Function entered at [<c02a2b04>] from [<c030bd78>]
[    8.990000]  r3:c78b9c00 r2:c78a213c r1:c7825f78 r0:c02c3b43
[    8.990000]  r7:c786b006
[    9.000000] Function entered at [<c030bb3c>] from [<c030bfc0>]
[    9.000000] Function entered at [<c030bf2c>] from [<c030b9b0>]
[    9.010000]  r5:c0333400 r4:c0333400
[    9.010000] Function entered at [<c030b864>] from [<c002d8a0>]
[    9.020000]  r5:c030b864 r4:00000000
[    9.020000] CPU0: stopping
[    9.020000] Backtrace:
[    9.020000] Function entered at [<c0010f34>] from [<c02a291c>]
[    9.020000]  r6:f4000100 r5:00000000 r4:c0351930 r3:c033d6a4
[    9.020000] Function entered at [<c02a2904>] from [<c0008414>]
[    9.020000] Function entered at [<c0008338>] from [<c000d678>]
[    9.020000] Exception stack(0xc0337f40 to 0xc0337f88)
[    9.020000] 7f40: 00000000 00000000 c0337f88 00000000 c0336000 c02a9b54 c033c0cc c0351804
[    9.020000] 7f60: 6000400a 410fb025 602a89d8 c0337f94 c0337f98 c0337f88 c000e5e4 c000e5e8
[    9.020000] 7f80: 60000013 ffffffff
[    9.020000]  r5:60000013 r4:c000e5e8
[    9.020000] Function entered at [<c000e5bc>] from [<c000e86c>]
[    9.020000] Function entered at [<c000e7e8>] from [<c029a42c>]
[    9.020000]  r7:c033c0c4 r6:c032cb3c r5:c03517c4 r4:c0338b14
[    9.020000] Function entered at [<c029a3c8>] from [<c030b808>]
[    9.020000] Function entered at [<c030b560>] from [<60008040>]
[    9.020000]  r6:c032cb38 r5:c033820c r4:00c5387d
发表于 2013-10-21 20:50:02 | 显示全部楼层
刷了第三个选项的系统,拔电拔掉硬盘后启动不起来。
插回硬盘启动几次后出现选项界面,刷第二个系统拔掉硬盘,正常启动进入系统,但是这个系统只要一接sata硬盘就启动不了,也就没法出现系统选择菜单,没法测试其他系统。
发表于 2013-10-21 22:20:01 | 显示全部楼层
关键没有ttl或pogo ttl坏了怎么版
发表于 2013-10-22 08:53:33 | 显示全部楼层
请问一下mk,  (CEC0D5F1B6AB_1003)论坛大神最新固件,支持恢复默认设置的 这个链接呢?

我在下面帖子里只找到9月14号的,没看见10月03号

https://godiy.net/thread-13112-1-3.html
发表于 2013-10-27 07:33:34 | 显示全部楼层
收藏 。。。。
发表于 2013-10-28 16:22:04 | 显示全部楼层
请问刷完之后,把硬盘格式成ext3接内置sata总是进不了系统。提示disk reading error,把硬盘结成usb就好了是咋回事呢
发表于 2013-10-30 08:44:04 | 显示全部楼层
修复之后接SATA硬盘启动不了,需要修改那个环境参数?请大神指点!
发表于 2013-10-31 22:49:12 | 显示全部楼层
刷了启动不了了
Loading from device 0: 128MiB 3,3V 8-bit (offset 0x200000)
   Image Name:   PandoraBox-OX820-3.1.10
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1197464 Bytes =  1.1 MB
   Load Address: 60008000
   Entry Point:  60008000
## Booting image at 60500000 ...
   Image Name:   PandoraBox-OX820-3.1.10
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1197464 Bytes =  1.1 MB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.10 (xbmc@xbmc-MCP7A) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #11 SMP Wed Sep 25 19:11:24 CST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: PogoPlug Pro
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 7 pages/cpu @c04b8000 s4768 r8192 d15712 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=ubi0:rootfs ubi.mtd=6,512 rootfstype=ubifs rootwait console=ttyS0,115200 mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125548k/125548k available, 5524k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xed000000   ( 584 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc030b000   (3084 kB)
[    0.000000]       .init : 0xc030b000 - 0xc03352a0   ( 169 kB)
[    0.000000]       .data : 0xc0336000 - 0xc0351700   ( 110 kB)
[    0.000000]        .bss : 0xc0351724 - 0xc03b42dc   ( 395 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:146 nr_irqs:146 146
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.000000] console [ttyS0] enabled
[    0.030000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.100000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] Initializing cgroup subsys cpuacct
[    0.110000] Initializing cgroup subsys memory
[    0.120000] Initializing cgroup subsys devices
[    0.120000] Initializing cgroup subsys freezer
[    0.130000] CPU: Testing write buffer coherency: ok
[    0.130000] Calibrating local timer... 349.84MHz.
[    0.190000] platform_smp_prepare_cpus 33
[    0.190000] CPU1: Booted secondary processor
[    0.190000] CPU1:Got wake up!
[    0.270000] Brought up 2 CPUs
[    0.270000] SMP: Total of 2 processors activated (557.87 BogoMIPS).
[    0.280000] devtmpfs: initialized
[    0.280000] NET: Registered protocol family 16
[    0.790000] PCIeA version/deviceID 082510b5
[    0.790000] PCIeB version/deviceID 082510b5
[    3.820000] ox820_pci_preinit() PCIEB link up timeout (00001814)
[    3.820000] ox820_pcie_setup_resources() Enabling PCIe Pre-Emphasis
[    3.830000] ox820_pciea_setup_resources() resource c781bc60
[    3.830000] ox820_pciea_setup_resources()    io:      0x4be00000 - 0x4befffff
[    3.840000] ox820_pciea_setup_resources()    non-pre: 0x48000000 - 0x49ffffff
[    3.850000] ox820_pciea_setup_resources()    pre:     0x4a000000 - 0x4bdfffff
[    3.850000] PCI: bus0: Fast back to back transfers disabled
[    3.860000] PCI: bus1: Fast back to back transfers enabled
[    3.870000] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff]
[    3.870000] pci 0000:00:00.0: BAR 0: set to [mem 0x48000000-0x4800ffff] (PCI address [0x48000000-0x4800ffff])
[    3.900000] bio: create slab <bio-0> at 0
[    3.910000] SCSI subsystem initialized
[    3.920000] Switching to clocksource rps-timer2
[    3.930000] NET: Registered protocol family 2
[    3.930000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    3.940000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    3.950000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    3.950000] TCP: Hash tables configured (established 4096 bind 4096)
[    3.960000] TCP reno registered
[    3.960000] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    3.970000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    3.970000] NET: Registered protocol family 1
[    4.010000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.010000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    4.020000] msgmni has been set to 245
[    4.030000] io scheduler noop registered
[    4.030000] io scheduler deadline registered (default)
[    4.040000] io scheduler cfq registered
[    4.050000] ox820_gpio: initialized
[    4.050000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.070000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[    5.060000] brd: module loaded
[    5.070000] loop: module loaded
[    5.070000] ox820sata: OX820 sata core.
[    5.080000] scsi0 : oxnassata
[    5.090000] scsi1 : oxnassata
[    5.090000] ata1: SATA max UDMA/133 irq 50
[    5.090000] ata2: SATA max UDMA/133 irq 50
[    5.100000] sata_ox820: Initialized
[    5.100000] ONFI flash detected
[    5.110000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    5.120000] Scanning device for bad blocks
[    5.150000] Bad eraseblock 224 at 0x000001c00000
[    5.180000] Bad eraseblock 394 at 0x000003140000
[    5.280000] Creating 9 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[    5.280000] 0x000000000000-0x000000040000 : "stage1"
[    5.290000] 0x000000040000-0x0000001a0000 : "u-boot"
[    5.300000] 0x0000001a0000-0x0000001e0000 : "u-boot-env"
[    5.310000] 0x000000000000-0x000002000000 : "boot"
[    5.310000] 0x0000001e0000-0x000000200000 : "factory"
[    5.320000] 0x000000200000-0x000000c00000 : "kernel"
[    5.330000] 0x000000e00000-0x000008000000 : "rootfs"
[    5.340000] split_squashfs: no squashfs found in "NAND 128MiB 3,3V 8-bit"
[    5.340000] 0x000000200000-0x000008000000 : "firmware"
[    5.350000] 0x000000000000-0x000008000000 : "fullflash"
[    5.360000] UBI: attaching mtd6 to ubi0
[    5.360000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    5.370000] UBI: logical eraseblock size:    129024 bytes
[    5.380000] UBI: smallest flash I/O unit:    2048
[    5.380000] UBI: sub-page size:              512
[    5.380000] UBI: VID header offset:          512 (aligned 512)
[    5.390000] UBI: data offset:                2048
[    5.450000] ata1: SATA link down (SStatus 0 SControl 300)
[    5.800000] ata2: SATA link down (SStatus 0 SControl 300)
[    5.800000] UBI: max. sequence number:       9
[    5.800000] UBI error: ubi_read_volume_table: the layout volume was not found
[    5.800000] UBI error: ubi_init: cannot attach mtd6
[    5.810000] Probing for Synopsis GMAC, unit 0
[    5.810000] eth0: Tuning GMAC 0 RGMII timings
[    5.820000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[    5.820000] eth0: Disable EEE (Energy Efficient Ethernet 802.3az)
[    5.830000] eth0: GMAC ver = 53, vendor ver = 18 at 0xed400000, IRQ 40
[    5.840000] eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
[    5.840000] eth0: Ethernet addr: 00:30:e0:00:00:00
[    5.850000] ox820_led_gpio: initialized
[    5.860000] TCP cubic registered
[    5.860000] NET: Registered protocol family 17
[    5.870000] 8021q: 802.1Q VLAN Support v1.8
[    5.870000] VFP support v0.3: not present
[    5.880000] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0)
[    5.890000] Please append a correct "root=" boot option; here are the available partitions:
[    5.890000] 1f00             256 mtdblock0  (driver?)
[    5.900000] 1f01            1408 mtdblock1  (driver?)
[    5.900000] 1f02             256 mtdblock2  (driver?)
[    5.910000] 1f03           32768 mtdblock3  (driver?)
[    5.910000] 1f04             128 mtdblock4  (driver?)
[    5.920000] 1f05           10240 mtdblock5  (driver?)
[    5.920000] 1f06          116736 mtdblock6  (driver?)
[    5.930000] 1f07          129024 mtdblock7  (driver?)
[    5.930000] 1f08          131072 mtdblock8  (driver?)
[    5.940000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    5.950000] Backtrace:
[    5.950000] Function entered at [<c0010f34>] from [<c02a291c>]
[    5.960000]  r6:c032c530 r5:c7814000 r4:c0353150 r3:c033d6a4
[    5.960000] Function entered at [<c02a2904>] from [<c02a2b60>]
[    5.970000] Function entered at [<c02a2b04>] from [<c030bd78>]
[    5.970000]  r3:c7865800 r2:c781f93c r1:c7825f78 r0:c02c3b43
[    5.980000]  r7:c7814006
[    5.980000] Function entered at [<c030bb3c>] from [<c030bfc0>]
[    5.990000] Function entered at [<c030bf2c>] from [<c030b9b0>]
[    5.990000]  r5:c0333400 r4:c0333400
[    6.000000] Function entered at [<c030b864>] from [<c002d8a0>]
[    6.000000]  r5:c030b864 r4:00000000
[    6.010000] CPU1: stopping
[    6.010000] Backtrace:
[    6.010000] Function entered at [<c0010f34>] from [<c02a291c>]
[    6.020000]  r6:f4000100 r5:00000001 r4:c0351930 r3:c033d6a4
[    6.020000] Function entered at [<c02a2904>] from [<c0008414>]
[    6.030000] Function entered at [<c0008338>] from [<c000d678>]
[    6.030000] Exception stack(0xc783df60 to 0xc783dfa8)
[    6.040000] df60: 00000000 00000000 c783dfa8 00000000 c783c000 c02a9b54 c033c0cc c0351804
[    6.050000] df80: 6000400a 410fb025 602a89d8 c783dfb4 c783dfb8 c783dfa8 c000e5e4 c000e5e8
[    6.060000] dfa0: 60000013 ffffffff
[    6.060000]  r5:60000013 r4:c000e5e8
[    6.060000] Function entered at [<c000e5bc>] from [<c000e86c>]
[    6.070000] Function entered at [<c000e7e8>] from [<c02a0140>]
[    6.070000]  r7:c0351928 r6:c783c000 r5:c03409f8 r4:00000002
[    6.080000] Function entered at [<c02a0038>] from [<6029fad4>]
[    6.090000]  r6:00c0387d r5:00000015 r4:6784800a r3:c029fabc
发表于 2013-11-3 09:07:04 | 显示全部楼层
老大,TTL坏了怎么刷这个版本?痛苦啊
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|小黑屋|手机版|Archiver|GODIY论坛 ( 粤ICP备12089271号

GMT+8, 2018-5-28 11:34 , Processed in 0.102332 second(s), 7 queries , File On.

Powered by Godiy.net

快速回复 返回顶部 返回列表