请选择 进入手机版 | 继续访问电脑版

GODIY 自己动手亲力亲为的DIY社区一起来吧--GODIY论坛

 找回密码
 注册

扫一扫,访问微社区

搜索
楼主: mk-link

【10-4日更新】小白刷OPENWRT更简单。SATA救砖更简单。6in1一键刷机系统

[复制链接]
发表于 2013-10-6 17:24:48 | 显示全部楼层
好贴,必须顶。

先下载收藏了。
发表于 2013-10-6 17:25:56 | 显示全部楼层
好贴,必须顶。

先下载收藏了。
发表于 2013-10-6 18:48:15 | 显示全部楼层
请问flash有坏块的话,pogo还有得救吗?
发表于 2013-10-6 18:52:47 | 显示全部楼层
求第二个估计的链接
发表于 2013-10-8 11:11:12 | 显示全部楼层
好东西 mark
发表于 2013-10-8 16:17:00 | 显示全部楼层
强大。好帖。方便小白。论坛多点这种帖子就好了
发表于 2013-10-12 21:15:02 | 显示全部楼层
回复 1# mk-link


    为什么我刷完系统之后我怎么就联不上破狗了?按照上面的IP地址就是访问不了????
    急啊,在线等,谢谢!
发表于 2013-10-13 08:06:14 | 显示全部楼层
按照楼主的方法刷机了,信息如下,但是就是ping不通pogo也连不上pogo,是破狗网卡坏了吗?但是灯都亮,也闪,到底是什么问题了?求高手解决,谢谢!
NAS7820 BootStrap v0.1
[Fri Sep 27 08:37:50 CST 2013]
PLX Technology, Inc. 2010. All Rights Reserved
Copyright, lintel 2013.09
CPU Clock set to 700MHz ...
Testing Stage2 Memory...OK!
NAND Flash Info:
        Vendor ID:0x000000AD
        Product ID:0x000000F1
        Type ID:0x00000000

Reading Nand Flash, Image 0
  Hdr len: 0x00021D30
  Hdr CRC: 0x3A0B1834
OK


U-Boot 1.1.2 (Sep 23 2013 - 00:30:38)

U-Boot code: 60D00000 -> 60D21D30  BSS: -> 60D56558
RAM Configuration:
        Bank #0: 60000000 128 MB
SRAM Configuration:
        64KB at 0x50000000
NAND:128 MiB
In:    serial
Out:   serial
Err:   serial
Setting Linux mem= boot arg value
Reading upgrade flag from NAND address 0x01ec0000 : 0
Hit any key to stop autoboot:  0
Turn on Green LED.

Reset IDE: Initialising disks
SATA PHY not ready for device 0
SATA PHY not ready for device 1
ide_preinit failed

IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device

** Unable to use ide 0:1 for fatload **

Reset IDE:
IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device
** Bad partition 1 **

Reset IDE:
IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device

Reset IDE:
IDE device 0: Vendor:  Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available
... is now current device

Loading from device 0: 128MiB 3,3V 8-bit (offset 0x200000)
   Image Name:   PandoraBox-OX820-3.1.10
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1205272 Bytes =  1.1 MB
   Load Address: 60008000
   Entry Point:  60008000
## Booting image at 60500000 ...
   Image Name:   PandoraBox-OX820-3.1.10
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1205272 Bytes =  1.1 MB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.10 (lintel@lintel-ThinkPad-T430) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #12 SMP Mon Sep 23 17:03:38 CST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: PogoPlug Pro
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 7 pages/cpu @c04be000 s4768 r8192 d15712 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=ubi0:rootfs ubi.mtd=6,512 rootfstype=ubifs rootwait console=ttyS0,115200 mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125524k/125524k available, 5548k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xed000000   ( 584 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0311000   (3108 kB)
[    0.000000]       .init : 0xc0311000 - 0xc033b2a0   ( 169 kB)
[    0.000000]       .data : 0xc033c000 - 0xc0357980   ( 111 kB)
[    0.000000]        .bss : 0xc03579a4 - 0xc03ba580   ( 395 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:146 nr_irqs:146 146
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.000000] console [ttyS0] enabled
[    0.030000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.100000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] Initializing cgroup subsys cpuacct
[    0.110000] Initializing cgroup subsys memory
[    0.120000] Initializing cgroup subsys devices
[    0.120000] Initializing cgroup subsys freezer
[    0.130000] CPU: Testing write buffer coherency: ok
[    0.130000] Calibrating local timer... 349.76MHz.
[    0.190000] platform_smp_prepare_cpus 33
[    0.190000] CPU1: Booted secondary processor
[    0.190000] CPU1:Got wake up!
[    0.270000] Brought up 2 CPUs
[    0.270000] SMP: Total of 2 processors activated (557.87 BogoMIPS).
[    0.280000] devtmpfs: initialized
[    0.280000] NET: Registered protocol family 16
[    0.790000] PCIeA version/deviceID 082510b5
[    0.790000] PCIeB version/deviceID 082510b5
[    3.810000] ox820_pci_preinit() PCIEA link up timeout (00001014)
[    6.820000] ox820_pci_preinit() PCIEB link up timeout (00001014)
[    6.820000] ox820_pcie_setup_resources() Enabling PCIe Pre-Emphasis
[    6.830000] ox820_pciea_setup_resources() resource c785a2a0
[    6.830000] ox820_pciea_setup_resources()    io:      0x4be00000 - 0x4befffff
[    6.840000] ox820_pciea_setup_resources()    non-pre: 0x48000000 - 0x49ffffff
[    6.850000] ox820_pciea_setup_resources()    pre:     0x4a000000 - 0x4bdfffff
[    6.850000] PCI: bus0: Fast back to back transfers enabled
[    6.860000] PCI: bus1: Fast back to back transfers enabled
[    6.880000] bio: create slab <bio-0> at 0
[    6.890000] SCSI subsystem initialized
[    6.900000] Switching to clocksource rps-timer2
[    6.910000] NET: Registered protocol family 2
[    6.910000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    6.920000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    6.930000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    6.940000] TCP: Hash tables configured (established 4096 bind 4096)
[    6.940000] TCP reno registered
[    6.950000] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    6.950000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    6.960000] NET: Registered protocol family 1
[    6.990000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.000000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    7.010000] msgmni has been set to 245
[    7.010000] io scheduler noop registered
[    7.020000] io scheduler deadline registered (default)
[    7.020000] io scheduler cfq registered
[    7.030000] ox820_gpio: initialized
[    7.030000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    7.060000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[    8.050000] brd: module loaded
[    8.060000] loop: module loaded
[    8.070000] ox820sata: OX820 sata core.
[    8.070000] scsi0 : oxnassata
[    8.080000] scsi1 : oxnassata
[    8.080000] ata1: SATA max UDMA/133 irq 50
[    8.090000] ata2: SATA max UDMA/133 irq 50
[    8.090000] sata_ox820: Initialized
[    8.100000] ONFI flash detected
[    8.100000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    8.110000] Scanning device for bad blocks
[    8.230000] Bad eraseblock 826 at 0x000006740000
[    8.260000] Creating 9 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[    8.270000] 0x000000000000-0x000000040000 : "stage1"
[    8.280000] 0x000000040000-0x0000001a0000 : "u-boot"
[    8.290000] 0x0000001a0000-0x0000001e0000 : "u-boot-env"
[    8.290000] 0x000000000000-0x000002000000 : "boot"
[    8.300000] 0x0000001e0000-0x000000200000 : "factory"
[    8.310000] 0x000000200000-0x000000c00000 : "kernel"
[    8.320000] 0x000000e00000-0x000008000000 : "rootfs"
[    8.320000] split_squashfs: no squashfs found in "NAND 128MiB 3,3V 8-bit"
[    8.330000] 0x000000200000-0x000008000000 : "firmware"
[    8.340000] 0x000000000000-0x000008000000 : "fullflash"
[    8.350000] UBI: attaching mtd6 to ubi0
[    8.350000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    8.360000] UBI: logical eraseblock size:    129024 bytes
[    8.360000] UBI: smallest flash I/O unit:    2048
[    8.370000] UBI: sub-page size:              512
[    8.370000] UBI: VID header offset:          512 (aligned 512)
[    8.380000] UBI: data offset:                2048
[    8.430000] ata1: SATA link down (SStatus 0 SControl 300)
[    8.780000] ata2: SATA link down (SStatus 0 SControl 300)
[    8.780000] UBI: max. sequence number:       205
[    8.810000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 8, need 9
[    8.820000] UBI: attached mtd6 to ubi0
[    8.830000] UBI: MTD device name:            "rootfs"
[    8.830000] UBI: MTD device size:            114 MiB
[    8.840000] UBI: number of good PEBs:        911
[    8.840000] UBI: number of bad PEBs:         1
[    8.850000] UBI: number of corrupted PEBs:   0
[    8.850000] UBI: max. allowed volumes:       128
[    8.860000] UBI: wear-leveling threshold:    4096
[    8.860000] UBI: number of internal volumes: 1
[    8.870000] UBI: number of user volumes:     1
[    8.870000] UBI: available PEBs:             0
[    8.870000] UBI: total number of reserved PEBs: 911
[    8.880000] UBI: number of PEBs reserved for bad PEB handling: 8
[    8.890000] UBI: max/mean erase counter: 1/0
[    8.890000] UBI: image sequence number:  1542252765
[    8.890000] UBI: background thread "ubi_bgt0d" started, PID 357
[    8.900000] Probing for Synopsis GMAC, unit 0
[    8.910000] eth0: Tuning GMAC 0 RGMII timings
[    8.910000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[    8.920000] eth0: Disable EEE (Energy Efficient Ethernet 802.3az)
[    8.920000] eth0: GMAC ver = 53, vendor ver = 18 at 0xed400000, IRQ 40
[    8.930000] eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
[    8.940000] eth0: Ethernet addr: 00:30:e0:00:00:00
[    8.950000] ox820_led_gpio: initialized
[    8.950000] TCP cubic registered
[    8.960000] NET: Registered protocol family 17
[    8.960000] Bridge firewalling registered
[    8.960000] 8021q: 802.1Q VLAN Support v1.8
[    8.970000] VFP support v0.3: not present
[    9.100000] UBIFS: recovery needed
[    9.360000] UBIFS: recovery completed
[    9.370000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    9.370000] UBIFS: file system size:   114573312 bytes (111888 KiB, 109 MiB, 888 LEBs)
[    9.380000] UBIFS: journal size:       9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[    9.390000] UBIFS: media format:       w4/r0 (latest is w4/r0)
[    9.390000] UBIFS: default compressor: lzo
[    9.400000] UBIFS: reserved for root:  0 bytes (0 KiB)
[    9.400000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[    9.410000] devtmpfs: mounted
[    9.410000] Freeing init memory: 168K
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   14.540000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[   14.550000] Backport generated by backports.git backports-20130617-4-ge3220f5
[   14.690000] cfg80211: Calling CRDA to update world regulatory domain
[   14.710000] cfg80211: World regulatory domain updated:
[   14.710000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.720000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.730000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.740000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.740000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.750000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.980000] usbcore: registered new interface driver usbfs
[   14.990000] usbcore: registered new interface driver hub
[   14.990000] usbcore: registered new device driver usb
[   15.760000] usbcore: registered new interface driver rt73usb
[   15.820000] usbcore: registered new interface driver rtl8187
[   15.980000] usbcore: registered new interface driver rt2800usb
[   16.100000] NET: Registered protocol family 8
[   16.110000] NET: Registered protocol family 20
[   16.470000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   16.970000] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[   17.080000] PPP generic driver version 2.4.2
[   17.500000] usbcore: registered new interface driver p54usb
[   17.630000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.830000] NET: Registered protocol family 24
[   17.920000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.930000] Initializing Oxnas-SoC USB Host Controller
[   17.930000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI
[   17.940000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
[   17.970000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x40200100
[   17.990000] oxnas-ehci oxnas-ehci.0: USB 2.0 started, EHCI 1.00
[   17.990000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   18.000000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.010000] usb usb1: Product: OXNAS EHCI
[   18.010000] usb usb1: Manufacturer: Linux 3.1.10 ehci_hcd
[   18.010000] usb usb1: SerialNumber: oxnas-ehci.0
[   18.020000] hub 1-0:1.0: USB hub found
[   18.020000] hub 1-0:1.0: 2 ports detected
[   18.080000] nf_conntrack version 0.5.0 (1963 buckets, 7852 max)
[   18.350000] usb 1-1: new high speed USB device number 2 using oxnas-ehci
[   18.500000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[   18.510000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   18.510000] usb 1-1: Product: USB2.0 Hub
[   18.520000] hub 1-1:1.0: USB hub found
[   18.520000] hub 1-1:1.0: 4 ports detected
[   18.710000] xt_time: kernel timezone is -0000
[   19.450000] Ebtables v2.0 registered
[   19.840000] i2c /dev entries driver
[   19.930000] usbcore: registered new interface driver ath9k_htc
[   20.040000] usbcore: registered new interface driver cdc_acm
[   20.050000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   20.200000] usbcore: registered new interface driver snd-usb-audio
[   20.230000] usbcore: registered new interface driver usblp
[   20.280000] usbcore: registered new interface driver usbserial
[   20.290000] USB Serial support registered for generic
[   20.300000] usbcore: registered new interface driver usbserial_generic
[   20.300000] usbserial: USB Serial Driver core
[   20.370000] Initializing USB Mass Storage driver...
[   20.370000] usbcore: registered new interface driver usb-storage
[   20.380000] USB Mass Storage support registered.
[   20.460000] Linux video capture interface: v2.00
[   20.670000] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[   20.680000] usbcore: registered new interface driver belkin
[   20.680000] belkin_sa: v1.3:USB Belkin Serial converter driver
[   20.720000] USB Serial support registered for ch341-uart
[   20.720000] usbcore: registered new interface driver ch341
[   20.760000] USB Serial support registered for cp210x
[   20.760000] usbcore: registered new interface driver cp210x
[   20.770000] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[   20.830000] USB Serial support registered for FTDI USB Serial Device
[   20.840000] usbcore: registered new interface driver ftdi_sio
[   20.840000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[   20.900000] USB Serial support registered for GSM modem (1-port)
[   20.900000] usbcore: registered new interface driver option
[   20.910000] option: v0.7.2:USB Driver for GSM modems
[   20.940000] USB Serial support registered for oti6858
[   20.950000] usbcore: registered new interface driver oti6858
[   20.980000] USB Serial support registered for Qualcomm USB modem
[   20.990000] usbcore: registered new interface driver qcserial
[   21.020000] USB Serial support registered for Sierra USB modem
[   21.030000] usbcore: registered new interface driver sierra
[   21.030000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   21.080000] USB Serial support registered for TI USB 3410 1 port adapter
[   21.080000] USB Serial support registered for TI USB 5052 2 port adapter
[   21.090000] usbcore: registered new interface driver ti_usb_3410_5052
[   21.100000] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[   21.130000] cm109: Keymap for Komunikate KIP1000 phone loaded
[   21.140000] usbcore: registered new interface driver cm109
[   21.140000] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[   21.190000] usbcore: registered new interface driver usbhid
[   21.200000] usbhid: USB HID core driver
[   21.230000] gspca: v2.13.0 registered
[   21.280000] usbcore: registered new interface driver zc3xx
[   21.310000] usbip_core: module is from the staging directory, the quality is unknown, you have been warned.
[   21.320000] usbip_core: USB/IP Core v1.0.0
[   21.390000] usbcore: registered new interface driver uvcvideo
[   21.390000] USB Video Class driver (1.1.1)
[   21.420000] vhci_hcd: module is from the staging directory, the quality is unknown, you have been warned.
[   21.440000] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[   21.440000] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2
[   21.470000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   21.470000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   21.480000] usb usb2: Product: USB/IP Virtual Host Controller
[   21.490000] usb usb2: Manufacturer: Linux 3.1.10 vhci_hcd
[   21.490000] usb usb2: SerialNumber: vhci_hcd
[   21.500000] hub 2-0:1.0: USB hub found
[   21.500000] hub 2-0:1.0: 8 ports detected
[   21.510000] vhci_hcd: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0
[   21.540000] usbip_host: module is from the staging directory, the quality is unknown, you have been warned.
[   21.560000] usbcore: registered new interface driver usbip-host
[   21.560000] usbip_host: USB/IP Host Driver v1.0.0
[   24.650000] Offload is not active on eth0
[   24.650000] Alloc'ing ARM descs 10240 bytes
[   24.660000] eth0: Resetting GMAC
[   24.660000] eth0: Found GLI interrupt, RGMII status = 0x0000000f
[   24.670000] eth0: GMAC reset complete
[   24.680000] eth0: Setting Rx flow control thresholds for LAN port
[   25.180000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[   25.180000] eth0: Disable EEE (Energy Efficient Ethernet 802.3az)
[   25.690000] eth0: link down
[   27.690000] device eth0 entered promiscuous mode
[   29.190000] eth0: link up, 1000Mbps, full-duplex, using pause, lpa 0xCDE1
[   29.190000] br-lan: port 1(eth0) entering forwarding state
[   29.200000] br-lan: port 1(eth0) entering forwarding state
[   31.200000] br-lan: port 1(eth0) entering forwarding state



BusyBox v1.19.4 (2013-09-23 10:38:09 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______________________________________________________________
|    ____                 _                 ____               |
|   |  _ \ __ _ _ __   __| | ___  _ __ __ _| __ )  _____  __   |
|   | |_) / _` | '_ \ / _` |/ _ \| '__/ _` |  _ \ / _ \ \/ /   |
|   |  __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) >  <    |
|   |_|   \__,_|_| |_|\__,_|\___/|_|  \__,_|____/ \___/_/\_\   |
|                                                              |
|                      DreamBox Team                           |
|                    Copyright 2011-2013                       |
|                  https://dev.openwrt.org.cn                  |
|______________________________________________________________|
  Base on OpenWrt (PandoraBox, r722)
root@PandoraBox:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:30:E0:00:00:00  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:5958 (5.8 KiB)

eth0      Link encap:Ethernet  HWaddr 00:30:E0:00:00:00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:9928 (9.6 KiB)
          Interrupt:40

eth0.2    Link encap:Ethernet  HWaddr 00:30:E0:00:00:00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:3930 (3.8 KiB)

lo        Link encapocal Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:240 errors:0 dropped:0 overruns:0 frame:0
          TX packets:240 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:16992 (16.5 KiB)  TX bytes:16992 (16.5 KiB)

root@PandoraBox:/#
发表于 2013-10-13 20:10:03 | 显示全部楼层
我今天刷了,也是提示成功,但是PING不通,登陆不上去,等待救助啊!
发表于 2013-10-14 15:11:46 | 显示全部楼层
有的系统不是192.168.1.1
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|小黑屋|手机版|Archiver|GODIY论坛 ( 粤ICP备12089271号

GMT+8, 2018-12-14 07:56 , Processed in 0.125746 second(s), 6 queries , File On.

Powered by Godiy.net

快速回复 返回顶部 返回列表